How to Clean Tile Floors in 2 Simple Steps

If we talk about tiles, they are one of the most hygienic and easily maintained wall and floor surfaces you can choose. As tiles are non-absorbent, tiles tend not to absorb any liquid, smoke, or fumes. If we say it, if we say it, in other words, it’s very hard to get the tiles dirty, and they require a quick clean once a week. To remove the cementitious residues such as grout haze and kiln dust, a lighter cleaning solution is good alternative to a Phosphoric Acid Cleaner.

If the tile is polished porcelain, then it will have a factory applied protective wax on the surface of it and that should be removed with a high-quality PH cleaner. We always recommend you seal your grout with a penetrating grout sealer. It’s always recommended to seal your grout with a penetrating grout sealer – a quick application can last years and makes grout cleaning can last years and maintenance a breeze.

Following these two easy steps will keep your tiles in top condition:

1- Sweep or vacuum area to be cleaned.

Using a vacuum, you need to vacuum the area or swipe it. It will help you in removing the most of the dirt and grit from the area. Hence, making the next step much easier for you. Getting rid of these little annoying particles will protect your tiles from getting getting scratched.

2- Mix cleaning solution according to manufacturers directions

Using a solution of warm water, wipe down the tiles with a mop or cloth with a drop or two of vinegar or disinfectant added. Be sure don’t use too much of water and flood the tiles, as this will just wash the dirt into the grout. A damp mop or cloth will be perfect to lift the dirt from the surface of the tiles. You shouldn’t use any soaps, detergents, powders, or chemical cleaners for regular cleaning.

These things, actually make it harder to keep the tiles clean, especially with continued If you want to use any of the above kind of cleaners for a more heavy-duty clean, rinse thoroughly with the clean water to completely remove the cleaner.

How to Remove Grease from Leather

Soaps and many detergents which contain soap can leave a thin film of soap scum on the surface of your tiles if they aren’t completely rinsed. This layer of soap can trap dirt and grease and can build up over time to the point where your tiles start to change the color. Many chemical cleaners have the acidic or alkaline base, so if you don’t rinse it properly, it can damage the surface of your tiles or later react with dirt and grease to cause other problems. If you require something that is a bit stronger for difficult areas, we generally, recommend concentrated stone and tile cleaner or good tile and stone cleaner.

Wet areas such as showers have slightly different cleaning needs as they are subjected not only to moisture but often to soaps, body oils and higher amounts of dirt as well.

TimothyFor a clean and healthy home, you can contact Timothy or Call Sydney metro carpet cleaning on PH 1300660276to get your Tiles and Grout professionally cleaned  We serves all the Sydney areas and offers 100% clean guarantee on our work.

Leave a Reply

Your email address will not be published. Required fields are marked *